NewUIs TDC 7.5.0 TheDarkWraith Test Version

; Edited by TheDarkWraith for NewUIs_TDC_7_5_0 ; Edited on 5/27/2013 @ 2200 NewUIs with TDC for SH5 by TheDarkWraith version 7.5.0 YOU HAVE TO BE PATCHED TO v1.2 OF THE GAME!!! COPYRIGHT NOTICE: The code changes made to the .py files are the intellectual property of TheDarkWraith and may not be used, modified, or duplicated in whole, or in part, without the express written permission of TheDarkWraith. The code changes made to these files may not be used in any commercial application of any form without the express written permission of TheDarkWraith. To install this mod correctly do the following: Navigate to where you unzipped the mod to and open it up. Select the 'MODS' folder and right click on it. Select copy. Navigate to your '\Ubisoft\Silent Hunter 5\' folder and open it up. Right click in an empty area and select paste. Enable 'NewUIs_TDC_7_5_0_ByTheDarkWraith' via JSGME FIRST then enable any additional add-on mods you want (this assumes you setup JSGME to use the 'MODS' folder as default) NOTE: is this mod perfect? NO WAY. It will continue to evolve as I learn more about the files and the game itself. Does the mod contain any bugs or errors? I hope not but to say it doesn't would be foolish. I will address errors/bugs as users find them and post them in my UIs thread. If the automatic mast height function isn't working correctly please start the game with Admin rights (right click the SH5 icon and select RunAs-->Administrator) This mod will bring the several new UIs to SH5. Currently the list of UIs are: - SH3 style - SH4 style - SH5 Enhanced SH3 style UI consists of: - familiar 3 dials (throttle/speed, heading/rudder, depth25/depth260). - Officer shortcut bar with commands for officers. - TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials - Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph. SH4 style UI consists of: - familiar 3 dials (throttle/speed, heading/rudder, depth25/depth260). - TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials - Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph. SH5 Enhanced UI consists of: - TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials - Heading bar integrated into the speed bar. Clicking the heading bar readout will reveal a heading/rudder dial. The dial is switchable from heading mode to rudder mode by clicking on the button under the dial. Clicking on the heading bar readout again will hide the dial (it retains the mode it was in when revealed again). Mousing into the heading bar readout and pressing the appropriate keys will set the ordered heading. You can press and hold the appropriate keys to keep changing the ordered heading. The appropriate keys (and all options) can be changed by editing \MODS\NewUIs_TDC_7_5_0_TheDarkWraith\data\Scripts\Menu\TheDarkWraithUserOptions.py). Mousing out of the heading bar readout with a new ordered heading will cause this ordered heading to take effect. The dial can also be used to set the ordered heading / rudder angle. A tooltip has been integrated to be shown when you mouse into the heading bar readout. It will either display the current heading or if you have requested a new ordered heading the current ordered heading. Once within 5 degrees of the ordered heading the tooltip will start to display the current heading. The heading/rudder dial can also be cycled on/off using a hotkey. The state of the dial (rudder or heading) can be switched via hotkey also. - Officer shortcut bar with commands for officers. - optional integrated levels that gives the user Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph. Common to all UIs: - Option to enable heading display in Binocular view - Added skwasjer's digital clock to top right For those UIs that utilize the familiar 3 dials: - The dials have two states. - The first dial has the states of: engine order telegraph and speed. - The second dial has states of heading and rudder angle (though angle displayed on dial doesn't match rudder deflection currently. Still sorting that out). - The third dial has states of shallow depth and deep depth. - To change states simply click on the button below the dial. - The dials will expand when the mouse is inside them and they will contract when mouse is outside them (like zoom in/out). Individual zoom levels can be set for throttle, speed, heading, rudder, depth260, and depth25. - User can lock out each individual dial (and each state of the dial) from zooming. - The animation rate of the dials expanding/contracting can also be changed. - The dials can be customized by using a different .dds file. See the readme.txt file in \Dials. For those UIs that utilize the TDC: - There are four versions of the TDC included - All dials, minimal dials, spread angle only, and no TDC - All dials will take control of the functionality of the SH5 interface for a torpoedo solution (and associated controls in the SH5 stock UI are removed). - Minimal dials just exposes the dials not exposed by the stock SH5 UI and also uses the stock UI. - spread angle only just adds the spread angle dial to the TDC - No TDC removes the TDC from the mod. - The TDC interfaces have been included on the obs periscope, attack periscope, and UZO. User has option to disable TDC on each station mentioned. There are four versions of the TDC included - All dials, minimal dials, spread angle only, and no TDC. All dials will take control of the functionality of the SH5 interface for a torpoedo solution (and associated controls in the SH5 stock UI are removed). Minimal dials just exposes the dials not exposed by the stock SH5 UI and also uses the stock UI. Spread angle only just adds the spread angle dial to the TDC. No TDC removes the TDC from the mod. The TDC interfaces have been included on the obs periscope, attack periscope, and UZO. xxx = Attack, Obs, or UZO To install All dials (for each scope): In the options file set: xxxTDCMode = TDCAllDials To install minimal dials (for each scope): In the options file set: xxxTDCMode = TDCMinimalDials To install spread angle only dial (for each scope): In the options file set: xxxTDCMode = TDCSpreadAngle To install No TDC (for each scope): In the options file set: xxxTDCMode = NOTDCDials All user configurable settings can be found in the file '\MODS\NewUIs_TDC_7_5_0_TheDarkWraith\data\Scripts\Menu\TheDarkWraithUserOptions.py'. NOTE: When editing this file ensure you save the file as Unicode encoding in order for non-ANSI characters to be displayed in game! ********** NOTE: *********** In order to receive debug messages from the ship's journal feature of the mod you need to ensure the following is set like the below in your \Documents\SH5\data\cfg\main.cfg: [DEVELOPING] Modding=Yes MenuEditor=No DebugScripts=Yes NOTE: If the user option AOBSpeedTDCFixEnabled is enabled (set to True) then this is how the fix works: There are two dials for the AOB and Speed in the TDC. One is the TGT value, one is the Sol value. If you have manual input enabled then when the mouse mouses into the AOB or Speed dial it switches to the TGT dial. You set the desired value and when you mouse out the Sol dial will update itself based on what you set the TGT value to. In order to make the value persist you have to click the red button for that dial. When you do this it sets the data in the TDC. Now when you use the stadimeter those values will not be reset. There is one caveat to this though: if you use the stadimeter the AOB TGT dial will be reset. This means that if you mouse into the AOB dial you will have to reset the value to the correct value or the AOB Sol dial will be set to some extremely bogus number. If you do not have manual input enabled then you will constantly see the Sol dials of the AOB and Speed. I made the red buttons active. This means that if you mouse into the red buttons the AOB and Speed dials switch to the TGT dials so you can see what the values are before committing them. Once you mouse out the dials switch back to their Sol dials. This mod also saves and restores position information of certain draggable items. Those draggable items that do not have dragging enabled via the options file will not be updated at game start - they will default to their default position information. The draggable items are: - Officers - SH5 Enhanced mode heading/rudder dial - Clock - XO TDC Dialog box - Otto's integrated Chalkboard mod - Messagebox - Gramophone - Radio - Enhanced Recognition Manual add-on mod The position information is stored in a file for each page. The files are located in your SH5 install path (...\Silent Hunter 5). The files are named as follows: pagex_Draggables.TDW. The information in the files is stored in binary form and can be viewed using a hex editor if one wishes. To erase all stored position information simply delete the pagex_Draggables.TDW files. Upon restart of the game new files will be created and the items will be at their stock default location. NOTE: if you are having trouble with items not repositioning or the likes it is probably because Windows is enforcing a privilege level on the game. Simply start the game with Admin rights (right click the SH5 icon and select RunAs-->Administrator) Automation has been added to this mod. Automation is exactly as it sounds - the automatic carrying out of orders defined by the user via scripts. All available commands are defined in \data\Automation\TDW_Automation.txt (this file can be opened with Notepad). A BIG thanks to maerean_m for information and assistance he gave in helping me make the TDC come to life for the obs periscope, attack periscope, and UZO. Thanks again!! The default text is English. There is a new folder called '\Text'. In it you will find folders of all the different languages I have for the mod. Navigate to you language and then copy the menu.txt file and paste in '\MODS\NewUIs_TDC_7_5_0_TheDarkWraith\data\Menu'. Then copy the 'MODS' folder to your '\Ubisoft\SilentHunter5\' folder (this assumes that you setup JSGME to use the MODS folder as default). Enable via JSGME. The Attack Disc has been added to the mod. You can find documentation for it in \Documentation\Attack_Disc_Handbook.pdf The mod has a feature called Follow Target. Follow target is just as it sounds - when enabled it will follow the currently selected target or current target in your crosshairs. Follow target can be found under WEPS-->Follow target and WA-->Follow target. Follow target, when enabled, has an order bar with one box - Follow target offset. By mousing into this box and using the mousewheel, one can change where the crosshairs 'center' on the contact. To enable follow target for ships: - pan scope to place target in crosshairs or select target by clicking on it in TAI map - you can lock the contact if you want by pressing space (not required) - enable follow target To enable follow target for aircraft: - using scopes: - click on aircraft in TAI to select it - enable follow target - using flak gun: - man the flak gun yourself (either teleport to it or manually walk to it and select it) - click on aircraft in TAI to select it - enable follow target Current languages supported by this are: English German French Polish Spanish Russian Italian Swedish Chinese I urge you to play the game with the enhanced SH5 UI. I prefer this UI to even the SH3 UI (familiar 3 dials). I still haven't gotten around to fixing the problems with the SH4 UI command bar yet. Manos scope mod is the default scope mod for this mod. Default aspect ratio is 4:3. NOTE: The default RAOBF graticules for the scopes are calibrated for the attack, obs, and UZO. Calibrations are: attack - 1x and 6x obs - 1x and 6x UZO - 7x If you are using a mod that changes the zoom levels of these scopes (i.e. Arclight's periscope mod) then you'll need a patch to change the graticules to the correct 'value'. Contributors (\Included mods from others): TheDarkWraith - Uboat snorkel mod Antar - math formulas for many of the features used in this mod briklebritt - new dials. You can find them under \Dials\German\metric_briklebritt (these are the default dials used in this mod). He also contributed to German translations in menu.txt file. idl0r - German translations of menu items added in menu.txt file. TLT - French translation of menu.txt file. FLB Sale U999 - used his TDC_metric.dds file for the dials in the TDC Reaper 7 - graphics work (emergency surface icon). He also made the Enhanced Ship ID recognition manual. Made the shipping chart for the nav map. Reworked RAOBF .dds files from karamazovnew. Author of Enhanced Recognition Manual that is added to this mod as an add-on mod. Ducimus - for vision of how stock SH5 UI needed to be improved skwasjer - digital clock jaxa - Polish translation of menu items added in menu.txt file. AOTD_Rhoenen - officer icons gutted - recommendations for new features dotChuckles - for idea of removing the lock/break lock tags from the obs, attack, and UZO views. He did his via menu editor, I did mine via scripting. kapitan_zur_see - no crosshair mod emt_guf - new periscope displays jimimadrid - photo looking icons for the map tools (modified by TheBeast to be compatible with this mod) conus00 - his rez dials (1024 X 1024). New .dds files for draggable compasses. Flag chart for navigation map Yoram777 - Idea to fix incorrect XO picture in the XO_TDC screen. ottos - for Nomograph (Nomograph.dds author is Chris /SH4 Metric Nomograph) and for chalkboard mod lynx - Spanish translation of menu.txt file. naights - a new WWII style skin for SH3 UI style. New .dds file for ottos chalkboard mod. New .dds file for advanced hud speed. New .dds file for notepads in UZO, attack, and obs scopes. New TDC dial graphics Nauticalwolf - corrected the CE icon of the officer's bar (made new .dds for officers). Made new TeleportOrders.dds file for the teleport orders bar. Made new officer icons for denoting healthy, wounded, and dead. Fixed the eagle on one of the draggable compasses that was upside down. Makman94 - used his compass mousecursor as a draggable compass on the nav map. Used .tga files for the Attack Disc and U-Jagd chronometer from his MaGui 3.4 mod (I converted them to .dds files). His 'Manos scope mod' is the default scope mod for this mod sentenc3 - spanish translations of menu.txt file Paco - german translations of menu.txt file Athlonic - French translations of menu.txt file kylania - english versions of TabelleStd and TabelleMin charts on the navigation map. Torp door switches (.psd file) b3rnard0c - Spanish translation of menu.txt file Mithrandir - Italian translation of menu.txt file Arclight - pulled his calibrated graticules from his periscope mod's .dds files to make the graticules part of the RAOBF ustahl - corrected misspelling on dials. Made new .dds files for the corrections joegrundman - graphics for U-jagd chrono, the attack disk and the RAOBF TheBeast/BIGREG - idea of how to get the DF loop and Radio Rod to rise/lower DrJones - input on how to unlock the AOB from the TDC. From this information I was able to unlock the AOB from the bearing for the AD's front side Amadeus - removing the annoying course message from Navigator pfeillant - french menu.txt translations Kaleun Freddie and vanjast - used the sextant tga (converted to .dds by moi) and sun tables from their mod(s) Txema - documentation on real navigation Illyustrator - world map for the change location feature of the mission settings box danurve - used his radio messages from his Radio traffic mod for SH3 Torpedo - revised alt_officer_wounded_by_naights .dds file to swap RO and SO pictures longam - new graphics for stock clock/chrono SilentSteel - Swedish menu.txt file translation kys2000 - chinese translation of menu.txt Magnum - new .dds file for new style of SOAN. Additional info (.ait) files for the sea folders Trevally - Additional info (.ait) files for the sea folders Church SUBSIM - alternate dial .dds files found in \Dials\Any\Metric gap - updated advanced depth images for the depth bar, sextant masks, and new icon for electric engines on surface The TabelleStd.dds and TabelleMin.dds files credits include: FLB_Sale_U999, FLB_Minks, Kptlt Eric Karle, and GWX If you feel you have contributed to this mod and I have failed to recognize you please PM about it. For those I did forget to mention THANK YOU! NOTE: Teleporting is not perfect! If you find yourself 'outside' of the sub press shift+U to get back inside. Hopefully you never find yourself in this situation..... Current additions working on for next version: - new bells and whistles TBD This is JSGME ready. Navigate to where you unzipped the mod to and open it up. Select the 'MODS' folder and right click on it. Select copy. Navigate to your '\Ubisoft\Silent Hunter 5\' folder and open it up. Right click in an empty area and select paste. Enable via JSGME. (this assumes you setup JSGME to use the 'MODS' folder as default) Add-on mods for this mod are located in the folder '\MODS'. Currently the following add-on mods are available: - 'NewUIs_TDC_7_0_0_alt_officer_wounded_by_Torpedo' - new officer icons that changes the wounded look - 'NewUIs_TDC_7_0_0_AltAdvSpeedGraphics_by_naights' - alternate advanced speed dial graphic by naights - 'NewUIs_TDC_7_0_0_Das_Boot_Crew_Mod_by_Illyustrator' - alternate officer icon images in Das Boot theme by Illyustrator - 'NewUIs_TDC_7_0_0_ERM_Reaper7_NightVision' - Reaper7's Enhanced Recognition Manual made to be compatible with this mod (along with some other changes) - 'NewUIs_TDC_7_0_0_ERM_Reaper7_NightVision_Black_Skin' - Reaper7's Enhanced Recognition Manual (with a black skin) made to be compatible with this mod (along with some other changes) - 'NewUIs_TDC_7_0_0_jimimadrids_map_tools' - alternate map tool icons by jimimadrid - 'NewUIs_TDC_7_0_0_New_radio_messages_German' - the new radio message sounds (via my TDWSound.dll) will be in German when this is enabled - 'NewUIs_TDC_7_0_0_Real_Navigation' - enables the real navigation feature of the mod - 'NewUIs_TDC_7_0_0_Scopes (do not enable - open and read)' - contains the scope mods included with this mod. Ensure you read the included documentation in that folder for setting up the scope you want - 'NewUIs_TDC_7_0_0_Sub_Warship_Merchant_Same_Shape' - warships, merchants, and subs except your own all use the same 2D symbol on the maps. NOTE: if you want the tooltips to be changed so you can't tell what kind of contact it is then you'll need to edit the menu.txt file: 821=Contact;Warship 822=Contact;Merchant 823=Contact;Submarine replace 'Contact' with whatever you want it to say - 'NewUIs_TDC_7_0_0_WWIIInterface_by_naights' - adds a new WWII style skin to the SH3 interface - 'NewUIs_TDC_7_0_0_No_Snorkel_Exhaust_Smoke' - removes the exhaust smoke from the snorkel Changelog: v1.0.0 - first official release - made dials customizable by using a new Dials.dds file (\data\Menu\Gui) - (SH3 UI style) the background that the dials are attached to and the battery,fuel,CO2,and compressed air can be customized by using a new hud.dds file (\data\menu\Gui) - change structure of folders in the files to use only \data\menu\Gui instead of \data\menu\Skins\American(or German)\Gui\Layout - fixed missing tooltips for Battery level, CO2 level, Fuel level, and compressed air level - fixed many other missing tooltips - new dials supplied by briklebritt used as default dials - (SH3/4 UI style) added ability for dials to zoom in/out - added new folder called '\Text'. In it contains folders of all the different languages I have for this mod. - renamed some global variables in Page layout.py to give better understanding of purpose - (SH3/4 UI style) fixed 'stuttering' problem with dials when mousing in/out - (SH3/4 UI style) fixed problem of other dials zooming in when one already zoomed in. User must mouse out of zoomed dial to be able to mouse in to another one - (SH3/4 UI style) zoomed dials dynamically reposition themselves when zoomed in to prevent any part of them from going offscreen (either the right edge or the bottom) - changed the behavior of the map tools side bar. The bar is now intelligent and knows when to minimize itself and when to restore itself. - 'TAB' key cycles the mini-map between it's different states. Shift-Tab puts it in minimized state. - (SH3/5 UI Style) Removed 'ghosts' of SH4 style controls. There was the possibility that user could click on one and cause a CTD - Default size of map on first click of expand arrow has been increased from default width and height to width = PageDefaultHud_Feedback_MapTools.Height + PageDefaultHud_Feedback_DepthGroup.Height and height = PageDefaultHud_Feedback_MapTools.Height + PageDefaultHud_Feedback_DepthGroup.Height thus making the map size the height and width of the expanded map tools and the DepthGroup's combined height to it's left (aesthetics) - (SH3/4 UI style) Each dial (and each dial's state) has it's own zoom level. User can change these to suit their liking - (SH3/4 UI style) Animation rate of zoom in/out can be changed by user to suit their liking - (SH3/4 UI style) some HUD items moved so as to not interfere with items moved by this mod - (SH3/4 UI style) New values for the dials (when you click on a dial to order it to a new depth, speed, etc.) now don't show up as 'small' hands. They appear as the size they should. - Changed folder structure of mod. This mod now incorporates a MODS folder so end user can easily copy to their \Ubisoft\SilentHunter5\MODS folder. - added the 'emergency surface' icon and command to the depth controls sidebar (Reaper 7 updated .dds file for this) - (SH3/4 UI style) disabled the advanced HUD mode - centered Periscope and Observation scope oculars in the screen - moved some TDC dials lower in the display and adjusted x offsets to the sides since centering oculars - (SH3/4 UI style) added ability to lock out dials from zooming. Mod defaults to all dials able to zoom. - added the abilitiy to use TDC all dials, TDC minimal dials, or no TDC. Mod defaults to TDC minimal dials (currently a manual setup) - (SH3/4 UI style) fixed bug where if user has a dial zoomed and mouses over another dial and the previous dial zoomes out and user orders command on this dial the new value would show in the zoomed state - (SH3/4 UI style) fixed bug where dials and all would show outside of the mission game state - (SH3/5 UI style) Added officer icons to HUD. Basic functionality of the game is restored through these officers. Click on an officer to show his available order categories (note: it is possible that some categories do now show. Conditions have to be met before they can show - i.e. under water, target locked, etc.). Click on an order category will show the available orders via a bar above them. Same applies for orders - certain conditions have to be met for them to show. - added skwasjer's digital clock to HUD - added Reaper 7's Enhanced ship ID recognition manual v1.1.0 - (SH3/5 UI style) added a timer that automatically updates the officer order categories and available orders so user doesn't have to continually click on them to see if they changed based on conditions - (SH3/5 UI style) gave user the option as to whether the orders bar hides when you select an order or not (HideOrderBarOnOrderClicked). Default is False (stays visible) - (SH3/5 UI style) gave user the option as to whether the orders bar hides when you press a key or not (HideOrderBarOnKeyPress). Default is False (stays visible) - gave user the option as to whether the mini-map switches to TAI mode or minimized mode when entering the obs, attack, or UZO stations. Default is True - switch to TAI mode (TAIModeOnScopeUZOStationSelected) - (SH5 Enhanced) gave users a hotkey to disable/enable the heading/rudder dial. This way the dial can be called up without having to click on the heading bar. Default key used is 'C' (HeadingRudderKey) - (SH5 Enhanced) gave users a hotkey to switch the heading/rudder modes. This way the dial can be switch between the two modes (heading or rudder) without having to click on the button below the dial. Default key used is shift + the hot key used to disable/enable the heading/rudder dial. Default setting would be shift + C. - added the user option to enable/disable the lock/break lock tags on the UZO, attack, and obs periscopes (ShowLockBreakLock). Defaults to False - not shown - (SH5 Enhanced) moved the rudder/heading dial over to the right so that it's centered over the heading bar (above it) - added support for emtguf's re-worked periscopes (emtgufPeriscopeReworkEnabled). - added folder \Backups that contains backup of files that user could potentially replace with others mods. These backups are the SH5 stock files. v1.2.0 - (SH3/5 UI style) fixed bug when navigator's plot course was picked the 'plot course' wasn't selected at first - total re-write of officer's bar, order catergories bar, and orders bars. Now when condition isn't met the icon is dark grey. When condition is met but not selected the icon is white. When condition is met and selected the icon is gold. If the item doesn't display an order bar or order category then it will never switch to a gold color. - (SH3/5 UI style) crew will select battery recharge mode when you surface from being submerged and have used some of your battery capacity. Once batteries are fully charged your crew will switch over to standard propulsion mode. User can switch to standard mode at any time. If user has switched to standard mode and batteries aren't fully charged, user can switch back to recharge mode. - fixed more bugs with TAI map not minimizing or restoring when entering/leaving stations - made new .dds files for order categories, officers, and orders. - (SH3/5 UI style) when an officer is selected a thin white border will appear around the officer - added user option to enable/disable the notes from displaying. This is the text that displays above the message box when you mouse over certain items. Default is True (display the notes) (ShowItemNotes) - (SH3/5 UI style) fixed the nasty right click bug on the officers - fixed bug where some items of UI would remain visible when talking with crew - (SH5 Enhanced) added user option to integrate the fuel, battery, compressed air, and CO2 levels into the bottom bar located just right of the heading bar (IntegrateLevels) - gave user option to have the message box start in expanded mode when game starts (MessageBoxStartsExpanded) - gave user option to have the mini-map start in one of it's three modes when the game starts (TAIModeOnGameStart) - (SH3/5 UI style) added command to Radioman - report nearest radio contact - (SH3/5 UI style) added command to Radioman - user radio (user can turn the radio on/off) - when submerging the sonarman will be given the command 'normal sweep'. This command will appear in the message box. - added add-on mod 'NewUIs_TDC_1_2_0_jimimadrids_map_tools' thus giving jimimadrid's photo looking icons for the map tools - utilized new interface for user radio and added missing tooltips - utilized new interface for gramophone and added missing tooltips - (SH3/5 UI style) gave user the option as to whether the order categories scrolled or not (OrderCategoriesScroll) - (SH3/5 UI style) fixed bug where when user had deck gun and/or flak gun manned and clicked on 'watch crew' nothing happened. Now when one or both of those stations are manned and user clicks on 'watch crew' those stations will unman. - moved the deck gun and flak gun reloading bars to top middle of the screen so they're not in the way of targeting - (SH3/5 UI styles) added ability to teleport to obs scope from WE-->Torpedo Attack and WO-->Choose deck gun target - (SH3/5 UI styles) added ability to teleport to attack scope from WE-->Torpedo Attack and WO-->Choose deck gun target - (SH3/5 UI styles) added ability to teleport to Hydrophone station from SO-->Hydrophone - (SH3/5 UI styles) added ability to teleport to Radar station from RA-->Radar - (SH3/5 UI styles) added ability to teleport to UZO from WO-->Crew on deck - (SH3/5 UI styles) added ability to teleport to Deckgun from WO-->Deck Gun - (SH3/5 UI styles) added ability to teleport to Flak gun from WO-->Flak gun - (SH3/5 UI styles) added heading to view and view to heading icons to Watch Officer as additional order categories (WO) - (SH3/5 UI styles) added heading to view and view to heading icons to Navigator as additional order categories (NO) - (SH3/5 UI styles) added clock icon to every officer's order category except Watch Officer (WA) - added the follow selected target feature. It is togglable via order category icons for WEPS (WP) and Watch Officer (WA). There is also a hotkey assigned for this with the default value of using key 'X' - (SH3/5 UI styles) added ability to disable the officer icons (RenderOfficerIcons) - made the XO TDC dialog box intelligent. It will reposition itself based on the current UI mode and options selected so that it's not in the way of the message box or anything else. - resized the XO TDC dialog box to make it slightly smaller in width - added nomograph to Nav map - added nomograph to mini-map - (SH3/5 UI styles) moved Radioman's Radio from an order to an order category - rewrote code for mini-map - added icon and hotkey to toggle nomograph for

скачать